Conveyor Belt Support Includes fixed supports, unidirectional sliding supports, and bidirectional sliding supports. Support specifications are divided into 22 levels. The vertical design bearing capacity, design turning angle, and friction coefficient of the support meet the requirements of relevant standards. Conveyor Belt Support The horizontal bearing capacity, vertical pulling force, and overall strength are significantly improved compared to ordinary supports. Conveyor Belt Support Using elastic damping components, it has the characteristics of clear structure, stable structural parameters, and excellent damping performance. This series of supports is suitable for large-span spatial structures and large-span beams and plates, especially for engineering structures in areas with high seismic intensity.

Let's take a look at Conveyor Belt Support the performance characteristics:

1. Omnidirectional rotation, omnidirectional load. It can well meet the requirements of transmission, rotation, and movement of reaction forces generated by various loads of the upper structure (such as dead load, live load, wind, and seismic force, etc.), and ensure that the reaction force is concentrated, clear, and reliable.

2. Conveyor Belt Support Can withstand tensile, compressive, and shear (lateral) forces. Under the action of huge random seismic forces, as long as the upper and lower structures are not damaged, due to Conveyor Belt Support the existence, there will be no catastrophic consequences such as beam collapse or frame collapse. Generally speaking, bearings are a weak link. Under strong seismic forces, beams or frames are easily collapsed. The strength and ductility of this type of support are higher than the structure itself, so rubber supports are particularly suitable for high-intensity areas.

3. Compared with other bearings (such as Conveyor Belt Support and pot-type Conveyor Belt Support etc.), Conveyor Belt Support has higher static stiffness. Under the action of the huge self-weight and inertial force of trains and large vehicles, the support only produces very small deformation, which can reliably ensure the smooth operation of vehicles, trains, and especially high-speed vehicles.

Conveyor Belt Support Maintenance:

1. Conveyor Belt Support Regular maintenance should be carried out annually;

2. Check whether the connecting welds of the support are loose or cut, and whether the seal of the support is damaged;

3. Check whether the relative displacement of the support is uniform, check and record the displacement of the support one by one;

4. Loosen the nut once, clean it and lubricate it to prevent the nut from rusting, and then tighten it;

5. The oil storage cavity on the rubber bearing should maintain sufficient lubricating oil and should not overflow (relative to the steel ball support);

6. Check Conveyor Belt Support the surface anti-corrosion coating for damage. Repair it in time if there is any damage.